The Aaron Derm 102 Diathermy is a new cost effective 10 watt high frequency Diathermy and Desiccator designed to perform in house minor skin procedures including removal of skin tags, benign lesions and premalignant lesions. Derm 102 has all of the functionality of a larger diathermy with power control on the pencil handle and the option of both mono-polar and bi-polar mode. The Bovie Derm 102 diathermy as with all the Aaron range comes ready for use with hand-piece, electrodes, wall mounting bracket and an instruction DVD so that it is immediately ready for use.

Change Power In One Easy Step
The Derm 102’s digital power control system allows you to change from low to high by simply pushing the up/down buttons on the hand-piece or rotating the power control knob.

Good News For Foot Control
If you need to use a foot control just plug it in. There is no need to purchase an expensive separate hand-piece for foot control situations. The same auto-clavable hand-piece that normally operates the unit allows for foot control activation and still retains the ability to activate the unit or adjust the output power via the up/down buttons.

Built to the Required Standards
The Derm 101 diathermy has passed the following safety standards:
CSA C22.2 NO 601.1-M90,
UL 2601-1-UL,
IEC 60601-2-2 (1998-90),
CENELEC EN 60601-1-2,
CENELEC EN 60601-2-2,
FCC PART 15 Class A.

Digital Error Detection
Means unsurpassed safety for you and your patient. The Derm 102 continuously
monitors every aspect of the output. At the first sign of any problem the
machine instantly disables the output and displays the appropriate error code
on the display.

Quality & Economy Without Compromise
A major part of the goal in designing the Derm 102 was to make our high quality Bovie
range available in a low cost, lower wattage design. Derm 102 is the most affordable
product in our range, we think that it is one of the best value options available with
the pricing putting it within reach of all practices.

The Bovie 3-button Diathermy Handpiece — Better by Design, Inside and Out
The basic function of a 3-button handpiece is to allow the user to control power
up/down and to activate the high frequency desiccator. It was our intention to give
you much more than that, so we did! Inside we put a superbly engineered collet that
firmly holds the electrode exactly where you place it. To top it off, we gold plated it
for superior conductivity. The collet is attached to our circuit board, and the entire
handpiece is encapsulated and formed in a high tech polymer that combines comfort
for you with a sure grip.

The buttons on the handpiece have been designed for superior tactile feel and comfort.
Lastly, we made it autoclavable so you can have sterility when you need it, and an easy to
clean and durable handpiece all the way around.

Accessories – the Derm 102 is supplied with everything you need to get started including
an instruction DVD, wall mounting bracket and a selection of sharp & blunt tips. Other
optional accessories to consider include:
– Bi-Polar forceps / cord / footpedal
– Rolling Stand
– Reusable or single use electrodes
– Smoke Evacuator

Output Power
Monopolar – 10 Watts
Bipolar – 10 Watts

Line Voltage
D102-220: 240 VAC ± 10%

Output Frequency
550 kHz

Line Frequency
50-60 Hz

Dimensions and Weight
Width: 18.4 cm
Height: 6.9 cm
Depth: 20.8 cm
Weight: 1.4 kg

Warranty
(Unit) – 2 years


Emech Medical Supplies

Please feel free to call us 0800 436 324 or email us sales@emech.co.nz for a comprehensive information pack and pricing on your requirements.